Outrigger pad holder 400x400 mm BX4/F
€101.00
Tengo una duda
€122.21IVA Inc.
Crane outrigger pad holder BX4/F for storing and transporting 2 pads measuring 400x400 mm. Recommended for pads with 40 and 50 mm thickness; not recommended for holding 2 pads of 60 mm. Manufactured from iridescent galvanized steel, with front locking pin, chain and padlock with key.
The crane outrigger pad holder 400x400 mm BX4/F is designed to store 2 outrigger pads measuring 400x400 mm in an organized way on truck-mounted cranes, loader cranes and equipment with stabilizers.
It is normally bolted to the side of the truck chassis, avoiding loose pads in the truck body or inside the cab. This improves vehicle organization, frees up space and makes the pads easier to access when working with the crane.
Manufactured from iridescent galvanized steel, it includes a front locking pin with chain and padlock with key. It is a practical solution for transporting stabilizer pads safely and accessibly.
Before selecting this model, confirm that the pads are 400x400 mm and check the available space for installation on the chassis.
|
Internal reference |
For pads |
Capacity |
Weight |
L |
W |
H |
Material / finish |
Locking system |
Condition |
|
BX4/F |
400x400 mm |
2 pads of 40 and 50 mm. Not recommended for 2 pads of 60 mm |
6 kg |
414 mm |
154 mm |
439 mm |
Iridescent galvanized steel |
Front locking pin with chain + padlock |
New |
CPA-BX4/F
You might also like
6 other products in the same category:
Crane outrigger pad holder BX4/F for storing and transporting 2 pads measuring 400x400 mm. Recommended for pads with 40 and 50 mm thickness; not recommended for holding 2 pads of 60 mm. Manufactured from iridescent galvanized steel, with front locking pin, chain and padlock with key.
Ayuda